This page no longer updated from 31 October 2001. Latest version can be found at www.astronautix.com

astronautix.com LR-91-11


Manufacturer Name: AJ23-140. Government Designation: LR-91-11. Designer: Aerojet. Used on stages: Titan 3A-2, Titan 3B-2, Titan 4-2. Used on launch vehicles: Titan 34B, Titan 34D, Titan 3A, Titan 3B, Titan 3BAS2, Titan 3C, Titan 3C7, Titan 3D, Titan 3E, Titan 3M, Titan 4, Titan 4B. Propellants: N2O4/Aerozine-50 Thrust(vac): 46,857 kgf. Thrust(vac): 467.00 kN. Isp: 316 sec. Isp (sea level): 160 sec. Burn time: 247 sec. Mass Engine: 589 kg. Diameter: 1.6 m. Length: 2.8 m. Chambers: 1. Chamber Pressure: 58.50 bar. Area Ratio: 49.20. Oxidizer to Fuel Ratio: 1.86. Thrust to Weight Ratio: 80.85. Country: USA. Status: In Production. First Flight: 1964. Last Flight: 1999. Flown: 185.

First Flown: late 1968 Titan 3, 1989 Titan 4. Dry Mass: 589 kg. Length: 281 cm. Maximum Diameter: 163 cm (skirt outer diameter). Mounting: fixed, but turbine exhaust utilized for roll control. Engine Cycle: gas generator. Oxidizer: nitrogen tetroxide at 97 kg/sec. Fuel: Aerozine-50 at 54.7 kg/sec. Mixture Ratio: 1.86:1. Thrust: 467 kN vacuum. Isp: 316 sec vacuum. Expansion Ratio: 49.2:1. Combustion Chamber Pressure: 58.5 atm. Cooling Method: fuel regenerative thrust chamber, with separate ablative skirt. Burn Time: 247 secs.Used in Titan 4-2; Titan 3B-2; Titan 3A-2.


Back to Index
Last update 12 March 2001.
Definitions of Technical Terms.
Contact Mark Wade with any corrections or comments.
Conditions for use of drawings, pictures, or other materials from this site..
© Mark Wade, 2001 .