This page no longer updated from 31 October 2001. Latest version can be found at www.astronautix.com

astronautix.com Vega 5VS

Vega lander
Vega lander - VeGa-1/2 Venus lander

Credit: Andy Salmon. 33,243 bytes. 336 x 439 pixels.



Manufacturer's Designation: 5VS. Class: Planetary. Type: Venus. Nation: USSR. Manufacturer: Lavochkin.

An unflown series of Venus probes (which also served as the basis for the Granat satellite). Original plans called for two versions, 5VS and 5VP, both weighing 4850 kg. 5VS was a Venus orbiter which would act as a relay station for a big Soviet-French balloon. The balloon was to be dropped into the Venusian atmosphere by the 5VP probe as it flew by Venus. Thereafter the 5VP would head for Halley's comet. The plan was to launch two 5VS probes in November 1984, followed by two 5VP probes on 6 and 11 December 1984.

The 5VP bus was able to carry only 50 kg of equipment to study Halley's comet. In 1981, while the development of both 5V versions was well underway, it was decided to cancel the 5VS orbiters and redesign the 5VP probes to expand the Halley research programme (this may have been in response to the cancellation of the US Halley probe the same year). This resulted in a spacecraft code-named 5VK, later named Vega. On the Venus package the big Soviet-French balloon was replaced by a smaller Soviet-built balloon and a 4V-1 type lander (minus camera). The flyby bus was equipped with the same solar panels as Veneras-15 and 16 and now carried a scan platform with remote sensing instruments to study Halley as well as extra dust protection shields.


Specification

Total Mass: 4,850 kg.



Bibliography:



Back to Index
Last update 12 March 2001.
Contact Mark Wade with any corrections or comments.
Conditions for use of drawings, pictures, or other materials from this site..
© Mark Wade, 2001 .