This page no longer updated from 31 October 2001. Latest version can be found at www.astronautix.com

astronautix.com ODERACS


Class: Calibration. Nation: USA. Agency: ???.

Orbital Debris Radar Calibration Sphere. The Orbital Debris Radar Calibration Spheres (ODERACS) spaceflight experiments were designed to provide small, low-earth orbiting calibration targets for the ground based radar and optical systems used for orbital debris measurements. The primary objective was to calibrate the Haystack Long Range Imaging Radar (LRIR) and validate the JSC Orbital Debris Analysis System (ODAS). These measurements and resulting data processing were a complete success.

The Haystack radar is used for orbital debris measurements in an unorthodox way. Instead of moving the radar dish to track satellites, the dish "stares" in a fixed direction. Debris objects that fly through the radar beam produce echoes that are recorded on magnetic tape. Analysis of the echo data must take into account that debris objects can fly through the radar beam from any direction and can cross the beam at any position. Entirely new analysis tools had to be developed to deal with this novel kind of data. Because of the complexity of this process, we felt that an end-to-end calibration of the radar and the associated data processing system was essential in order to be confident that the debris data derived from the radar were valid.

The question relating to radar operation was: Is the radar calibrated correctly, such that the measured radar cross section is the correct one? The question relating to the data processing system was: Are the physical sizes and orbital parameters calculated from the Haystack radar data correct? The only way to do these calibrations was to place known objects into orbit and measure them with the Haystack radar. From a practical point of view, metal spheres were the best choice for test objects, since their radar cross section is independent of aspect angle, and their shape makes them easy to deploy from the Shuttle Orbiter bay.

A problem with spheres is that they return only one polarization of radar waves (the Principal Polarization of PP). For this reason, the Haystack radar could be calibrated only for PP returns using spheres. Since irregular debris objects return both PP and OP (Orthogonal Polarization) signals, it was necessary to make an independent calibration of the radar for its response to OP returns. Wire dipole targets were used for this purpose, since they reflect exactly equal OP and PP polarizations.

The first mission, ODERACS 1, calibrated the PP response of the Haystack radar and the data processing system by launching calibrated metal spheres. The second mission, ODERACS 2 calibrated the OP response relative to the PP response by launching small wire dipoles. Spheres were also launched on the second mission to provide additional tests of the radar calibration and data processing system, and to provide orbital markers to help ground-based radars locate and track the tiny dipoles.

The ODERACS 1 flight experiment, flown on Discovery STS-60 in February 1994, deployed six spheres: two 6-inch diameter, two 4-inch diameter, and two 2-inch diameter. The spheres remained in orbit from eight to thirteen months and completely burned up upon re-entry. ODERACS 2 which was flown on Discovery STS-63 in February 1995, deployed three spheres (2-inch, 4-inch, and 6-inch diameters) and three dipoles (two 5.255 x .040 inch dipoles, and one 1.740 x .040 inch dipole). The ODERACS 2 targets remained in orbit from seventeen days to thirteen months.

The Haystack radar collected multiple measurements from the different ODERACS targets. The data were recorded from tracking, fly-through, and spiral scanning passes. The calibration accuracy was determined from the tracking passes by comparing the measured radar cross section (RCS) with the theoretical. Tables A and B below show the results from these tracking passes. The small difference between the spheres measured and theoretical RCS values verifies the calibration accuracy of the Haystack radar for PP returns. The measurements from the dipoles showed that the primary polarization (PP) and orthogonal (OP) return signals were very closely balanced, which was the primary objective of ODERACS 2. The larger differences between the dipoles measured and theoretical RCS indicates that the dipoles were tumbling in a plane that was skewed some 15 to 35 degrees from the radar.

The fly-through data, along with the spiral scanning data (which is used to determine the Haystack radar beam shape) was used to validate the ODAS software. After initial processing, some anomalies in the ODAS software were discovered and subsequently corrected. Initially, the spread in the RCS data from the theoretical was 4.5 dB; after the software modifications, the spread was reduced to 1.0 dB. This represents an improvement of 35 percent.

The optical effort associated with ODERACS was largely an "effort-of-opportunity" that was secondary to the purpose of calibrating the Haystack radar, but nonetheless, was shown to be useful for verification of orbital debris optical observational techniques and data analysis. A wide variety of optical sensors were able to view the 4-inch and 6-inch spheres and determine them to have magnitudes very similar to their predicted values. For example, a diameter of 3.93 +/- 0.24 inches was derived from the analysis of a CCD image of the ODERACS 1 4-inch diffuse sphere obtained from the NASA-JSC CCD Debris Telescope at Maui. In this case, the geometry and albedo of the object were well known, so this excellent result verified the optical data analysis process leading to debris piece sizes.


Specification


ODERACS Chronology


03 February 1994 ODERACS B Launch Site: Cape Canaveral . Launch Vehicle: Shuttle. Mass: 4 kg. Perigee: 332 km. Apogee: 352 km. Inclination: 57.0 deg.

Orbital Debris Radar Calibration Sphere; deployed from STS-60. Space craft engaged in investigation of spaceflight techniques and technology (US Cat A).


03 February 1995 ODERACS 2E Launch Site: Cape Canaveral . Launch Vehicle: Shuttle. Mass: 1 kg. Perigee: 261 km. Apogee: 270 km. Inclination: 51.6 deg.

Orbital Debris Radar Calibration spheres; deployed from STS 63 2/4/95. Reentered Feb 27



Bibliography:



Back to Index
Last update 3 May 2001.
Contact Mark Wade with any corrections or comments.
Conditions for use of drawings, pictures, or other materials from this site..
© Mark Wade, 2001 .