This page no longer updated from 31 October 2001. Latest version can be found at www.astronautix.com

astronautix.com Martin Project 7969

Proj 7969 Martin
Proj 7969 Martin -

Credit: NASA. 20,950 bytes. 351 x 320 pixels.



Class: Manned. Type: Spacecraft. Nation: USA. Agency: USAF. Manufacturer: Martin.

Martin's proposal for the Air Force initial manned space project was a zero-lift vehicle launched by a Titan I with controlled flight in orbit. The spacecraft would be boosted into a 240 km orbit for a 24 hour mission. Tracking would use the Minitrack System and deorbit would be accomplished by a retrorocket producing a 150 m/sec delta-v. Spacecraft attitude control was by rocket thrusters. The spacecraft was fully automatic and the pilot was only a passenger. Maximum G-forces during re-entry were 8-15 g's and an ablative heat shield was proposed. In case of booster failure during ascent to orbit the capsule would be ejected. The spacecraft had a ballistic coefficient (W/CdA) of 500 kg per square meter. Landing precision was within a 160 x 160 km footprint. It was expected that a first manned orbital flight could be achieved 30 months after a go-ahead.


Specification

Design Life: 1 days. Total Length: 4.3 m. Maximum Diameter: 2.4 m. Total Mass: 1,600 kg.



Bibliography:



Project 7969 DesignsProject 7969 Designs - Project 7969 designs. From left, top row: North American X-15B; Bell Dynasoar; Northrop Dynasoar; Republic Demi body; Avco maneuverable drag cone. Second row: Lockheed; Martin; Aeronutronics; Goodyear; McDonnell; Convair

Credit: (c) Mark Wade. 18,922 bytes. 640 x 273 pixels.



Back to Index
Last update 12 March 2001.
Contact Mark Wade with any corrections or comments.
Conditions for use of drawings, pictures, or other materials from this site..
© Mark Wade, 2001 .