This page no longer updated from 31 October 2001. Latest version can be found at R-1E

Designer: Marquardt. Propellants: N2O4/MMH Thrust(vac): 11 kgf. Thrust(vac): 0.11 kN. Isp: 280 sec. Burn time: 1,500 sec. Mass Engine: 4 kg. Diameter: 0.2 m. Length: 0.3 m. Chambers: 1. Chamber Pressure: 7.40 bar. Area Ratio: 26.00. Country: USA. Status: In Production. References: 225 .

A 110 N hypergolic thruster was developed as the Space Shuttle Orbiter's vernier attitude control and orbit adjust thruster. There are six employed in conjunction with the 38 3870 N R-40 thrusters. Applications: Shuttle Orbiter Vernier, satellite orbit adjust. First Flown: April 1981 on Columbia. Length: 279 mm, 312 mm satellite version. Maximum Diameter: 15.2 cm satellite version, 14 cm Shuttle version. Mounting: fixed. Engine Cycle: pressure-fed at 15 atm (range 6.8-27.2 atm). Oxidizer: nitrogen tetroxide at 0.0256 kg/sec. Fuel: monomethyl hydrazine at 0.0354 kg/sec. Mixture Ratio(O/F): 1.65 (range 1-2.7). Thrust: 110 N (range 67-155.7 N). Combustion Chamber: single chamber. Expansion Ratio: min ratio of 26 with orthogonal and scarfed nozzles. Combustion Chamber Construction: made of silicide-coated columbium (niobium) and insulated for buried installation.. Ignition: started by electrical signal to on/off solenoid valve. Single doublet injector with hypergolic ignition.. Burn Time: min 82,000 secs demonstrated. 0.89 Ns min impulse bit.

Back to Index
Last update 12 March 2001.
Definitions of Technical Terms.
Contact Mark Wade with any corrections or comments.
Conditions for use of drawings, pictures, or other materials from this site..
© Mark Wade, 2001 .