This page no longer updated from 31 October 2001. Latest version can be found at Rescue Ball

PRE Rescue Ball
PRE Rescue Ball - NASA Johnson Personal Rescue Enclosure escape ball - unhappy camper inside transparent demonstration version. The real version had a white cover with only a tiny porthole to prevent claustrophobia.

16,282 bytes. 298 x 266 pixels.

Other Designations: Personal Rescue Enclosure. Manufacturer's Designation: PRE. Class: Manned. Type: Bailout. Nation: USA. Agency: NASA. Manufacturer: Johnson.

Before the Challenger disaster, shuttle crews wore no space suits. This presented the problem of how to move them from one shuttle to another - if - it was possible to launch a rescue mission before the supplies aboard the stranded shuttle ran out.

To address this problem, Johnson Spaceflight Center devised the most minimal spacecraft of all time - the Personal Rescue Enclosure (PRE) Rescue Ball. The rescue ball was an 86 cm diameter high-tech beach ball with three layers: urethane inner enclosure, Kevlar middle layer, and a white outer thermal protective cover. Crew members were to climb into the ball, assume a fetal position, and be zipped inside by a space suited crew member. They donned an oxygen mask and cradled in their arms a carbon dioxide scrubber/oxygen supply box with one hour worth of oxygen. The ball would be connected by an umbilical to the shuttle to supply air until the airlock depressurized. The crew member would then be floated over to the rescue shuttle by the suited astronaut. The process would be repeated until the entire crew was moved from one spacecraft to another.

A tiny window was provided to prevent total sensory deprivation. It is said that when they were in use, astronaut candidates would be asked to get in one. After fifteen minutes or so, the candidate was asked how long they thought they had been in. If the candidate was not hysterical and guessed anything under an hour, they passed! The space ball was much touted and appeared in all kinds of kids' books about the shuttle before the Challenger explosion. Little has been heard of it since...

NASA Rescue BallNASA Rescue Ball - The original NASA Rescue Ball concept was a little bigger then than the Personal Rescue Enclosure that was finally built.

19,773 bytes. 202 x 359 pixels.


Craft.Crew Size: 1. Total Length: 0.9 m. Maximum Diameter: 0.9 m. Total Habitable Volume: 0.33 m3.


PRE Rescue BallPRE Rescue Ball - NASA Johnson Personal Rescue Enclosure escape ball - getting in.

8,026 bytes. 162 x 266 pixels.

PRE Rescue BallPRE Rescue Ball - NASA Johnson Personal Rescue Enclosure escape ball - suited astronaut would move it from shuttle to shuttle.

9,911 bytes. 245 x 269 pixels.

Back to Index
Last update 12 March 2001.
Contact Mark Wade with any corrections or comments.
Conditions for use of drawings, pictures, or other materials from this site..
© Mark Wade, 2001 .